pasobarmy.blogg.se - Windows xp boot disk with shuttle sd-501 driver

#WINDOWS XP BOOT DISK WITH SHUTTLE SD 501 DRIVER INSTALL#
#WINDOWS XP BOOT DISK WITH SHUTTLE SD 501 DRIVER UPDATE#
#WINDOWS XP BOOT DISK WITH SHUTTLE SD 501 DRIVER SOFTWARE#
#WINDOWS XP BOOT DISK WITH SHUTTLE SD 501 DRIVER DOWNLOAD#

Step 12: Run from CD-disk a file Driver_D_CAN_USB\OBDSetup.exe Step 11: In the file C:\Windows\OBD.INI put the number of USB-COM-port to the value that you remembered in the step_ 3 Check the parameter if you use another version of INPA !) (That is default parameter after installing from CD-disk given. Step 10: In the file EDIABAS.INI “Interface = STD:OBD” must be chosen Remember the number of the COM-port choosen ! Step 9: In Advanced field change number of COM-port to the value from 2 to 4.Īlso change the value of Latency Timer from 16 to 1.

#WINDOWS XP BOOT DISK WITH SHUTTLE SD 501 DRIVER INSTALL#

Step 7: Plug the Adapter into spare USB-port and install drivers manually from the folder Driver_D_CAN_USB using Driver Wizard of your Windows XP-Service Pack-2 Step 6: Find the file С:\EC-APPS\INPA\CFGDAT\ named inpa.iniĪnd replace it with the file inpa.ini that is in the root directory of CD-disk given.

#WINDOWS XP BOOT DISK WITH SHUTTLE SD 501 DRIVER UPDATE#

Activate all spare boxes with: INPA 5.0.1 – UPDATE, NCS Expert 3.0.8 – UPDATE.

While choosing the HDD disk for initial setup.

Choose ENGLISH, press Continue, then Continue again.

Step 5: Run file Step_3\INSTALL\Instprog.exe

Activate all spare boxes with : EDIABAS 6.4.3 – UPDATE, INPA 5.0.1 – UPDATE,.

Choose configuration BMW Group Rectification programs UK, press Continue.

INPA installation must be on drive С:\ ONLY !

While choosing the HDD disk for initial setup.

Choose ENGLISH, press Continue, then press Continue again.

Step 4: Run file Step_2\INSTALL\Instprog.exe

Parametrieren einer neuen Konfiguration ohne Daten.

Step 3: Run file Step_1\NFS\Entpackt\disk1\SETUP.EXE Step 2: Open folder Step_1\ in the root of the CD-disk comes with the inpa cable Step 1: Delete ALL versions of INPA-ADS from your computer or remane all INPA-ADS folders.įor example: remane INPA into “ _INPA”, EDIABAS into “ _EDIABAS” and so on.

#WINDOWS XP BOOT DISK WITH SHUTTLE SD 501 DRIVER SOFTWARE#

K+dcan usb interface software installation: The version 2016 cable is great, designed with the FT232RQ chip and a switch to turn LEFT is for 7 pin or RIGHT for 8 pin (8 pin for K-LINE communication (old DCAN cables cannot do it) for BMW from 1998 to 2008)

#WINDOWS XP BOOT DISK WITH SHUTTLE SD 501 DRIVER DOWNLOAD#

Note: this how-to guide here especially for Windows XP users onlyįor users with Windows Vista, Win 7 (32/64bit), Win 8, Win10, please go toīMW INPA Download & Install on Windows XP Vista Win7 Win8 Win10īmw inpa / ediabas interface: INPA K+DCAN usb cable Problems can arise when your hardware device is too old or not supported any longer.BMW INPA Windows XP installation guide… Here you go…The inpa ediabas software provided and the procedures proposed are intended for personal, educational and experimental use. This will help if you installed an incorrect or mismatched driver.

Try to set a system restore point before installing a device driver. It is highly recommended to always use the most recent driver version available. OPERATING SYSTEMMicrosoft Windows XP Professional/Home Edition POWER- 120W power adapter with active PFCĪUDIO7.1 High Definition Audio Realtek ALC880 codec INTERNAL PERIPHERALS- 802.11 a/b/g Wireless LAN (Intel 3945, mini card interface) OPTICAL DRIVESlim slot-in DVD Dual / Comobo Drive INTERNET CONNECTIVITYRealtek 8110 10/100/1000M Gigabit EthernetĬARD READER- Integrated 4-in-1 card reader ( SD / MMC / MS / MS-pro ) MEMORY512MB DDR2 533 dual channel(256MB x 2) SODIMM module x 2 PROCESSOR- Intel Core Duo T2400 1.83GHz ,667MHz FSB, 2M L2 cache